FOnline.cfg

Intro

"FOnline.cfg" uses very simple INI-like format to configure various FOnline settings. This file is created by the installer and is required to run the game.

Note: You can easily edit this file with text editor, or use provided tool FOConfig.exe instead. For syntax information see Configuration.

Details

More detail informations about each setting.

Light

The overall level of illumination. Can be altered in-game by pressing "+" and "-" keys.

Type: number

Range: 0-50

Default: 20

File content

Content of original, default FOnline.cfg file from FOnline2238Client_19_11_2010.exe installer.

[Game Options]
Language=engl

# Connection details
RemoteHost=94.23.237.127
RemotePort=2238

# ProxyType:
# 0 - None.
# 1 - Socks4
# 2 - Socks5
# 3 - HTTP
ProxyType=0
ProxyHost=127.0.0.1
ProxyPort=1080
ProxyUser=
ProxyPass=

# Combat mode by default.
# Used to determine the mode of battle, when the choice is limited.
# 0 - Both realtime and turn-based;
# 1 - Only realtime;
# 2 - Only turn-based. 
DefaultCombatMode=1

# The sound volume of music and sound effects.
# From 0 (off) to 100 (max)
MusicVolume=100
SoundVolume=50

# Will play sounds when the game window is not active.
GlobalSound=1

# Window. 
ScreenWidth=1024
ScreenHeight=768

# Fullscreen mode.
FullScreen=0

# On top of all windows.
# 0 - off (default)
# 1 - enabled 
AlwaysOnTop=0

# The overall level of illumination.
Light=20

# Smooth scrolling.
# From 1 to 32. 
ScrollDelay=4

# Additional reduction of speed scrolling.
# 4, 8, 16, 32.
ScrollStep=32

# The speed of the mouse in fullscreen mode. 
MouseSpeed=1

# Base time, during which the text is displayed. Milliseconds.
# Calculation: TextDelay + 1 symbol * 100 ms. 
TextDelay=3000

# Time of presenting information about damage. Milliseconds.
# 0 - off. Recommended value when on - 2000.
DamageHitDelay=0

# Reduce the load on the processor.
# The higher the value, the less CPU and FPS.
Sleep=10

# Switching layouts in the chat.
# 0 - Ctrl + Shift
# 1 - Alt + Shift
# 2 - Right Ctrl
LangChange=0

# Indication cartridges and wear and tear.
# 0 - Stripes
# 1 - Figures
# 2 - Stripes and figures 
IndicatorType=0

# Inverting the message box.
# 0 - messages go from the bottom up (new bottom, as in the original)
# 1 - the message goes from top to bottom (newest on top)
InvertMessBox=0

# If the game window is inactive and you receive an message, the taskbar icon will flash.
# This does not apply to reports on the results of the attack and some other messages.
# 0 - off
# 1 - enabled (default) 
WinNotify=1

# If the game window is inactive and you receive an message, you will hear a beep.
# This does not apply to reports on the results of the attack and some other messages.
# 0 - off (default)
# 1 - enabled 
SoundNotify=0

# Timeout for the second game running, in milliseconds.
# If zero configuration settings are taken from the OS.
DoubleClickTime=200

# Type of combat messages.
# 0 - full / verbose
# 1 - short / brief 
CombatMessagesType=0

# Path to resources FOnline.
FonlineDataPath=.\data

# DAT localization (Original, LK, Fargus, 1C ...) is not important. 
# If they are in the same folder as FOnline.exe, then do not change,
# Otherwise, enter the full path to the DATas.
MasterDatPath=Master.dat
CritterDatPath=Critter.dat

# FOnline DAT file. 
PatchDatPath=faction.zip

# Cache sprites.
FlushValue=200

# The size of the texture that will store the sprites. Must be a power of two 256, 512, 1024 ... 
BaseTexture=1024

# Vertical sync. 
VSync=1

# Additional cleaning the screen. 
BackGroundClear=1

# Smoothing 3D (Anti-Aliasing).
# -1 - Autodetection
# 0 - off
# 1 .. 16 - the value of smoothing
MultiSampling=-1

# Skinning.
# 0 - try hardware
# 1 - only software
SoftwareSkinning=0

# Simulation time-lapse graphic 3d models.
# Number of frames per second.
# If 0 - off, the animation will be played as smooth as possible
# When you turn on the optimal value - 10.
Animation3dFPS=0

# Smooth transitions in 3d graphics, the time in milliseconds.
# Applies only if Animation3dFPS = 0.
Animation3dSmoothTime =250

# Options concerning log.
Logging=1
LoggingDebugOutput=0
LoggingTime=0
LoggingThread=0