Timeouts
Contents |
Timeouts
Timeouts is in-game command that allows you to track different timers attached to your character, without opening Pip-Boy every time. Usefull not only for crafters, but also for not-so-lucky PvP players, when they run to exit grid.
Remember that:
- nothing is displayed if all your timeouts are equal to 0
- "battle" timer is never displayed during turn-based fight
- "exit game" timer is never displayed
- if you do something wrong, you can always remove configuration - default values will be used
Options
Always allowed
- ~timeouts - turns on/off timeouts displaying
Allowed only when timeouts are displayed
- ~timeouts color [R] [G] [B] - set color for timeouts names and values
- ~timeouts color1 [R] [G] [B] - set color for timeout names
- ~timeouts color2 [R] [G] [B] - set color for timeout values
- ~timeouts direction [up/down] - set where new positions should be added
- ~timeouts font [id] - set which font should be used (4-8)
- ~timeouts spacingx [px] - set horizontal distance between start position of timeout name and its value
- ~timeouts spacingy [px] - set vertical distance between each timeout
- ~timeouts [worldmap/wm] - set timeouts displaying on world map
- ~timeouts xy [x] [y] - set start position.
Disabled
This commands are currently disabled (they will be available "soon")
- ~timeouts load - reload default configuration
- ~timeouts load [name] - reload custom configuration
- ~timeouts save - save settings as default
- ~timeouts save [name] - save settings with given name
Configuration
Configuration is hold in FOnline2238.cfg file, in .ini files format, section 'Timeouts'. Currently, file is readed only when client starts or new cache is send by server.
Enabled
0: Off
1: On
Default: 1
Direction
Where new positions should be added.
0: down
1: up
Default: 1
Font
Default: 5
NameColor
Change color of timeouts names ("First Aid", "Gathering", etc.) using RGB format.
Default: 0 255 0
PositionX
Set the start X position for displaying timeouts.
Example for negative values: PositionX=-200 ⇒ PositionX=(ScreenWidth-200)
Default: -145
PositionY
Set the start Y position for displaying timeouts.
Example for negative values: PositionY=-200 ⇒ PositionY=(ScreenHeight-200)
Default: -110
SpacingX
Set horizontal distance between start position of timeout name (set by [[#PositionX|PositionX) and its value.
Default: 72
SpacingY
Set vertical distance between each timeout.
Default: 10
ValueColor
Change color of timeouts values ("7 seconds", "42 hours", etc.) using RGB format.
Default: 0 255 0
Worldmap
Display timeouts while on world map.
0: Off
1: On
Default: 0